Cont

Have any Questions?

+86 18626835909

May 11, 2022 View:

A Rotary Lobe Pump Is All You Need For Easy Treatment Of Manure In Pig Farms

Pig farm manure effluent is mainly a mixture of pig manure, sewage, urine, granules and flocculent matter, which is corrosive and abrasive. For a long time, there were no suitable products on the market, and most of them used self-priming centrifugal pumps, but the results were not satisfactory.

It is mainly reflected in: 1, the pump's transmission speed is too high, fast wear, short life; 2, self-priming force can not meet the requirements, the need to fill the pump before starting, and easy to clog; 3, large particles, long flocculent material is easy to block the inlet, and will also burn the machine.

However, this type of pump is more popular on small and medium-sized farms in the market due to its cheap price, the use of the effect does not meet the requirements, frequent replacement and high repetition rate of purchase, which not only wastes money, but also affects the delivery of manure and water, and also wastes manpower.

It is understood that piggery manure sewage, the problems to be solved focus on wear and tear, corrosion, self-absorption and other aspects. The lobe pump strong self-priming, low speed, wear and tear, corrosion resistance and good passability, etc., just to meet the pig farm manure sewage to solve the problem of transport.

Advantages of lobe pumps as manure transfer pumps for pig farms.

1、The lobe pump adopts a fully rubber covered rotor, which has a better passability of the medium and the rubber is resistant to wear and corrosion.

2, lobe pump volume rate in more than 90%, the pump operating speed is low, the general rotor control between 10-650 rpm, its rotor type full rubber cover, no gap between the rotor and the pump casing, the pump cavity to form a certain vacuum, manure sewage in the pump cavity stay time is short.

3, the lobe pump has a certain self-priming force, and there is no need to fill the pump before starting, it can also be forward and reverse, positive transfer and reverse flushing, the self-priming force of the pump is within 9 meters.

4、The lobe pump has a simple structure, small footprint, online maintenance, no need to remove the pipeline and the motor, and the pump is installed in dry mode.