Have any Questions?

+86 18626835909

May 18, 2022 View:

For the lobe pump maintenance method needs to be well studied

lobe pump is a kind of centrifugal pump, its fittings are made of stainless steel that meets the sanitary standards, and the seals are made of non-toxic rubber. It is used in various fields such as electronic appliances, daily necessities, food and beverage. To ensure the safety and hygiene of use. With the increasing demand for lobe pumps in many industries in China, it has become more and more important to accelerate the research on lobe pumps. For any mechanical equipment, the usual maintenance work done well, it is not only reflected in the production is normal, more importantly, directly affect the use of machinery and equipment orders, for the pump, of course, is no exception, for this reason, pay attention to the following aspects of maintenance work. 1, seals, pump seals are divided into static parts seal and moving parts seal, support static parts seal seal ring should pay attention to the surface do not have scratches or bruises, otherwise, for the direct impact on the sealing effect; otherwise, for the rotary pump. Otherwise, for the direct impact on the sealing effect; for moving parts seal, because it will be subject to pressure size and the corrosion of the transport medium, there are many factors such as wear and tear of particles in the medium if a little carelessness, there is likely to be leakage phenomenon. Once the product leaks, should promptly stop the maintenance, wipe clean with a soft clean cotton cloth, coated with a layer of glycerin, assembled, first after hand, before the machine can be turned on and used, such as repair is hopeless, should be replaced with new parts. 2, lubrication parts, the pump's transmission gear, rolling bearings, must maintain good lubrication conditions, usually, often pay attention to the gear in the oil level, give enough lubricant, and to ensure that the oil quality is pure, clean 3, electrical systems, around the electrical equipment, not allowed to store the instruments, substances or gases that damage the insulation. At the same time must keep the electric equipment in a dry environment work. If it is difficult to avoid should be added with moisture-proof facilities. 4, daily maintenance, whenever the shutdown does not work, will be based on the nature of the materials transported, the choice of the appropriate cleaning agent, the pump will be effective cleaning, after also have to clean with water once to ensure that the pump clean and sanitary.