lobe pumps are commonly used machinery and equipment in industry, therefore, the usual maintenance work must be done, otherwise it not only affects the normal production progress, but also directly affects the service life of machinery and equipment. The following is Ace's daily maintenance methods for extending the service life of lobe pumps.
1, seals, lobe pump seal is divided into static parts seal and moving parts seal, support static parts seal seal (should pay attention to the surface should not have scratches or bruises, otherwise, for a direct impact on the sealing effect; for moving parts seal, because it will be subject to the pressure size and the corrosion of the transport medium, there are also particles in the medium wear and tear and many other factors (if a little careless, it is likely to have a leak phenomenon. Once the product leaks, it should be stopped in time to overhaul, wipe with a soft clean cotton cloth, coated with a layer of glycerin, assembled, first by hand before starting to use, such as repair is hopeless, should be replaced with new parts.
2, lubrication parts, the pump's transmission gear, rolling bearings, must maintain good lubrication conditions, usually, often pay attention to the gear in the oil level, give enough lubricant, and to ensure that the oil quality of pure, clean, regular (six months or a year) to replace a new oil.
3. Electrical systems, around electrical equipment, are not allowed to store instruments, substances or gases that damage the insulation. At the same time, electrical equipment must be kept in a dry environment. If this is difficult to avoid, moisture-proof facilities should be added.
4, daily maintenance, whenever the shutdown does not work, will be based on the nature of the materials conveyed, the choice of the appropriate cleaning agent, the pump will be effective cleaning, and finally have to clean with water once, to ensure that the pump clean and hygienic.