Have any Questions?

+86 18626835909

May 18, 2022 View:

How to deal with the small water output of the lobe pump

What should I do with the small amount of water coming out of the lobe pump?
In the process of maintenance, if the water output is small, it will not only affect the self-priming ability, but also easily cause the engine temperature to be too high under the pressure, which will induce a series of problems such as short circuit. In the face of such a situation arises, which methods should be chosen to help, it may be a simple choice to see.
Checking the gap of the impeller
After a long time of use, it is easy to see that the gap between the impeller and the machine itself is too large due to the loosening of the impeller, which will not only affect the water output itself, but also cause the machine packing to be damaged. In the face of these conditions, it is advisable to replace the lobe pump housing itself, or to better adjust the impeller's mouth ring, which is the key to help the self-priming effect to be smoothly carried out. The company's products and services are available in a wide range of sizes and sizes.
Second, replacing the impeller's pipe
Sometimes the water flow pipe may be blocked by dirty things after a long time of not being effectively cleaned, and through this method of selection, it is easy to cause the risk of the self-priming ability becoming worse. So regular cleaning of the inner wall of the pipe, in addition to the need to do timely replacement treatment of the pipe if the storage is found to be too much, in order to ensure that the effect of the water discharge to get improved.