Cont

Have any Questions?

+86 18626835909

May 11, 2022 View:

Lobe Rotary Lobe Pump Gear Box Installation And Disassembly Need To Pay Attention To What

Lobe rotor pump is a multi-purpose two-way displacement pump manufactured with advanced foreign technology, which is widely used in petrochemical, fine chemical, daily-use chemical, pharmaceutical, food, environmental protection, paper, paint, metallurgy and other industries. So what do you need to pay attention to when installing and dismantling the gearbox of a rotary lobe pump? Here Ace will tell you.

When installing the gear box of the rotary lobe pump, first press the spherical spherical rolling bearing into the shaft (when installing the bearing, the force is evenly pressed into the shaft, if the fit is larger in terms of interference, the bearing should be put into mineral oil and heated to 90℃~100℃ and installed immediately), then install the bearing into the gear box body.

In addition, before starting the rotary lobe pump, it is necessary to check whether the oil quantity in the gear box is normal, observe the transparent oil mark, the oil stock is suitable for half of the oil mark sight window, the lubricating oil should be replaced regularly, in general, after 4,000 hours of operation, all should be replaced.

Zhejiang Ace Pumps is a professional manufacturer of rotary lobe pumps, its self-developed GS/DR series rotary lobe pumps, with strong self-priming force, good passability and flow range up to 1~2000m/h. It can be widely used in various fields such as petrochemical, sewage treatment, etc.