Cont

Have any Questions?

+86 18626835909

May 11, 2022 View:

Rotary Lobe Pump Gear Reducer Routine Maintenance

No matter what equipment only regular maintenance can reduce the failure rate, today Ace lobe pump 's will introduce you to the lobe pump gear reducer routine maintenance methods.

1, the reducer in the process of operation, should observe whether the reducer abnormalities occur, if so must immediately stop, contact the aftermarket to explain the phenomenon, and then confirm the cause of the phenomenon, and then use the more ideal method to solve.

2, reducer (or new replacement parts) after 400 hours of initial use operation, should replace a lubricant. In the future, the lubricant must be replaced every 5000 hours of work.

3、After every year of work, grease the bearings once to the oiling port.

4、Shut down or store for more than six months, in addition to the normal preparatory work before starting the machine, should check whether the rubber seal (oil seal) is aging and its sealing performance.

The above is the maintenance method of lobe pump gear reducer, I hope it will be helpful to you. Zhejiang Ace professional lobe pump manufacturer, 24-hour hotline: +086-18626835909