Cont

Have any Questions?

+86 18626835909

May 11, 2022 View:

Rotary Lobe Pump Routine Maintenance Precautions

For lobe pumps, the usual maintenance work is not only reflected in the normal production, but more importantly, directly affects the service life of the lobe pump. Today Ace lobe pump's to share a few lobe pump daily maintenance considerations.

1, seals. Pump seal is divided into static parts seal and moving parts seal, support static parts seal seal should be careful not to have scratches or bruises on the surface, otherwise, for a direct impact on the sealing effect; for moving parts seal, because it will be subject to the pressure size and the corrosion of the transport medium, there are many factors such as the media in the particles of wear and tear if a little carelessness, it is likely to have a leak phenomenon occurs. Once the product leaks, should promptly stop the maintenance, wipe clean with a soft clean cotton cloth, coated with a layer of glycerin, assembled, first after the hand, before the machine can be turned on and used, such as repair is hopeless, should be replaced with new parts.

2. Lubricated parts. The pump's transmission gears, rolling bearings, must maintain good lubrication conditions. Usually, often pay attention to the oil level in the gear, give enough lubricant, and to ensure that the oil quality is pure, clean, regular (six months or a year) to replace a new oil.

3. Electrical systems. Around electrical equipment, no instruments, substances or gases that damage the insulation are allowed to be stored. At the same time, electrical equipment must be kept in a dry environment. If this is difficult to avoid, moisture-proof facilities should be added.

4、Daily maintenance. Whenever the shutdown is not working, the pump will be cleaned effectively according to the nature of the materials to be conveyed and the corresponding cleaning agent will be selected, and finally it will have to be cleaned again with clean water to ensure the cleanliness and hygiene of the pump.