Lobe rot or pumps have an extremely wide range of applications, are highly applicable and have the advantages of stable operation, simple maintenance and high cost performance. The exact pressure that a rotary lobe pump can have is determined by the different pump types. The following is a brief introduction.
The maximum pressure of a rotary lobe pump is generally related to the machining accuracy of the pump, the higher the accuracy the higher the output pressure, but also to the material strength, hardness, hardness, wear and tear is small, maintain high pressure output for a long time. In general, the maximum pressure value of the rubber rotor will be greater than the copper rotor than the stainless steel rotor, so in the selection of the type, you can make different choices according to the properties of the medium and the requirements of the work station.
The Zhejiang Ace rotary lobe pump has a strong self-priming force with a maximum suction range of 8.5 m and a flow rate of 1-2,000 m/h. It can convey media with a maximum viscosity of 100,000 cp and slurries with a maximum solids content of 60%.