Have any Questions?

+86 18626835909

May 14, 2022 View:

Why lobe rotor pump can become the mainstream of replacing screw pump

Why has the lobe lobe pump become the mainstream replacement for the progressive cavity pump?

A project for cyanobacteria management in Yunnan originally used a single screw pump to transport algae, but it was often clogged, causing frequent replacement of screw pump parts, which were replaced very frequently, then the result was more and more maintenance costs and higher and higher. Companies and individuals who have used single screw pumps know that their screw pump maintenance is very complicated, and now users choose Ace cam lobe pump as algae mud transfer pumps, which not only have durable parts, a small variety and number of parts, almost no maintenance, and good operation.

Next, let's look at the features of algal sludge transfer pump:

1) Non-clogging: the pump cavity can pass oversized particles, the maximum particle size can pass 75mm;

2) Wear resistance: the cam rotor is fully wear-resistant rubber covered, when conveying media containing solid particulate matter, elastomer rotor customers have easily let solids through, plus axial and radial protection liner There is absolute anti-wear protection for the pump casing, delaying the service life of the pump.

3) Energy-saving power-saving pump operating efficiency of up to 85%.

4) Strong self-priming ability: Thanks to the design of the middle isolation chamber of Ace lobe pump, which ensures the lubrication of the pump to protect the seal in the case of self-priming, yes the seal can not fail due to heat. At the same time, the engagement of the rubber rotor with almost zero clearance ensures a good vacuum efficiency of the inlet when the pump is running. Very good self-priming effect is achieved. Up to 8-9m self-priming effect

5) Ultra-wide flow range 0.5~1600m3/h, any flow rate can be selected.

6) Compact design and small installation size of the pump.